Packaging Detail:one in a white box .Individually packaged
5-10 working days as per order quantity
Wireless Control light system---unusual wireless control WL-101
1.Brief introduction- wireless control
I.Brief introduction about Wireless control light system
i)Wireless control light system is composed by hardware and software. Main hardware components include: WL-101 WL-102 WL-201 WL-301 and WL-401 that develop based on IEEE 802.15.4 and works at 2.4GHz ISM Frequency band to wireless control Zigbee network..
ii) WL-101, WL-102, WL-201 could control WL-301 or WL-401 while WL-301 or WL-401 could control dimmable driver.
iii) WL-101, WL-102, WL-201 and WL-301 or WL-401, could set up a network individually, could set up a network by part compoents, even could set up a network by all. It can be used to realize dimming light by Wall dimmer, remote controller, PC or smartphones with Android system etc. There are many WL-101 WL-102 in a network.
Remark: If no PC or smartphone, you could use dimmer or remote controller to dim by WL-101 or WL-102 matched with WL-301(WL-401) only. WL-101,WL-201, WL-301, WL401 could set up network individually but WL-102 could not set up and join set-up network only!
II) Brief introduction about Wireless Dimmer WL-101
WL-101 is wireless dimmer that must work together with our other dimming components WL-301 or WL-401, to dim light by dimmer.
2.Description about each part of WL-101
i) short press to set up a ZIGBEE webautomatically ( at initialization, indicator light twinkles, twice per second);
ii) long press about 3 sec. Then shout press to activate allowing enter pattern;
iii) short press as ON/OFF key after finished web or joined network, with Memory Function (the last brightness when on again)
3.Environmental and electrical parameters
Input Voltage (AC)
-20°C To 55°C
5.Instructions about WL-101
Before installation and use, WL-101 must be set up a network with other components, and even be paired with other components according to need.(a network could many WL-101, WL-102, WL-301 or WL-401). How to set up network and How to pair? Detail information as below:
I) set up network
i) Before setting up network, all components must be at initialization, neither setting up nor joining other network (All devices are default initialization at factory- indicator light flashes, except for customer’s sepcial request); All components must be electrified;
ii) Short press dimmer Key(1-2 seconds), LED indicator light will be on from flicker and it means that network has been set up sucessfully;
iii) Long press Dimmer Key(3 seconds), release, then short press Dimmer Key(1-2 seconds). At the same time, LED indicator light will flash. It means that 30 seconds allowing enter pattern has been activated . During these 30 seconds, other Initializing devices could be joined this network automatically. All components indicator light will be on after finished joining network sucessfully. Allowing enter patternwill be turned off automatically. you will do this operation again if other Initializing devices will join.
Remark: After all devices have been joined this network, WL-101 could control all diming devices when it never pair with other controller; When two or more WL-101in the same network and any WL-101 is not paired with WL-301(WL-401), each WL-101 could control all WL-301(WL-401).
II)Pair with other dimming devices
If user want to control part diming controller, such as to control one WL-401, WL-101 needs to be paired with this WL-401.
How to pair?
i) Test whether allcomponents in the network
when all devices are electrified in the same network, press any key (dimmer Key for WL-101 or Test key for WL401 or other) to check all led indicator light whether twinkes once; If twinke, it means that all components work well;
ii) Pair (Take WL-101 and WL-401 for example)
Press WL-401 TEST key, then revolve dimmer key of WL-101, then stop WL-401 TEST key, WL-401 and WL-101 have been mated up; other controllers could be paired with WL-101 like this.
Remark: when independent pairing, each WL-401 or WL-301 could be paired 10pcs WL-101 max.
6.How to restore factory settings?
If WL-101 is not at initialization( it has been joined other network or paired with other controller while indicator light is on), please remove network or paired devices before use to new network!
Method 1: a)Turn off power;
b)Press Dimmer Key and trun on agin;
c)Keep pressing Dimmer about 3 seconds, remove all original network information. WL-101 blue indicator light will flash quickly.
Method 2: Long press Dimmer Key about 10 seconds, indicator light twinkles slowly (once per second), then short press this key to remove all original network information. WL-101 blue indicator light will flash quickly.
Remark: if there is other devices with allowing enter pattern in other network, this controller will join this network automatically.
II) Remove paired devices
If WL-101 still work in orginal network, only remove paired devices. When paired devices are electrified, Long press Dimmer Key about 10 seconds, indicator light twinkles slowly (once per second), then long press this key 3 seconds again to remove paired devices;
7.Specifications and Package
Size:86*86mm N.G: 145G
Package: one in a white box. Individually packaged.