Packaging Detail:2pcs in a white box
5-10 working days as per order quantity
Wireless Control light system---professional new product 1-10V control WL-401
1.Brief introduction- professional new product 1-10V control
I. Brief introduction about Wireless control light system
i)Wireless control light system is composed by hardware and software. Main hardware components include: WL-101 WL-102 WL-201 WL-301 and WL-401 that develop based on IEEE 802.15.4 and works at 2.4GHz ISM Frequency band to wireless control Zigbee network.
ii) WL-101, WL-102, WL-201 could control WL-301 or WL-401 while WL-301 or WL-401 could control dimmable driver.
iii) WL-101, WL-102, WL-201 and WL-301 or WL-401, could set up a network individually, could set up a network by part components, even could set up a network by all. It can be used to realize dimming light by Wall dimmer, remote controller, PC or smartphones with Android system etc. There are many WL-101 WL-102 in a network.
Remark: If no PC or smartphone, you could use dimmer or remote controller to dim by WL-101 or WL-102 matched with WL-301(WL-401) only. WL-101,WL-201, WL-301, WL401 could set up network individually but WL-102 could not set up and join set-up network only!
II .Brief introduction about -10V controller WL-401
i) WL-401 IS 0-10V Controller that works together with 0-10V or 1-10V dimmable driver;
ii) WL-401 is the ultimate component when 0-10V dimmable driver dims. All control signals arrive here. Its main function is to receive Instruction Signal from Wireless dimmer WL-101, remote controller WL-102 or Zigee Network Controller WL-201, then to offer 0-10V output voltage to dimmable driver, to control output change for dimmable driver in order to achieve the lightings controled finally. One WL-401 could control 10pcs 0-10V/1-10V dimmable driver max.
iii) WL-401 work together with WL-101 in a network to realize diming by dimmer; WL-401 worker together with WL-101 and WL-102 in a network to realize to dim by dimmer and remote controller.
2.The descrption about each button
L:Input 110/220VAC live wire
N: Input 110/220VAC zero line and dimmable driver zero line
L: input dimmable live wire
4. Environment and Electric Parameter
-25°C To 50°C
matched power supply
Shengchang 0-10V/1-10V dimmable LED power supply
5. Instructions about WL-401
I. How to set up network?
Short press TEST Key in any 0-10V controller WL-401, then release. indicator in WL-401 will be on from flicker and it means that network has been set up sucessfully; remark: while wireless dimmer WL-101 or Remote controller WL-102 join this network while the 0-10V controller WL-401 must be electrified
Remark: 1)All devices are default initialization, nether form nor joined network( except for customer’s sepcial request); indicator light will flash at initialzation; 2) All Zigbee devices must be in the same network to communicate with each other; 3) make sure there must be no other Zigbee network around or existance Zigbee network with non- allowing enter pattern.
II. How to join other components?
After setting up the network, short press TEST Key over 1second, then release. At the same time, indicator light will flash. It means that 30 seconds allowing enter pattern has been opened . During these 30 seconds, other Inital devices that are electrified could be joined auotmatically and their and indicator will become on. Allowing enter patternwill be turned off automatically. you will do this operation again if other devices will join.
III. Test whether all conrtoller in the same network:
Short press Test Key in any controller in this network. If all indicators flashed once in this network, it menas all devices in the same network. If not, please join this device in this network again.
IV. How to pair with WL-101 or WL-102?
Wl-401 could pair with WL-101 or WL-102 to realize dimmer control or remote control. The detail information will be seen specification about WL-101 and WL-102
6. How to restore factory settings—remove network
When a controller WL-401 has been in network ( its LED indicator light is on), if it will be joined toa new network, please remove the original network information firstly!.
a)Turn off power;
b)Press TEST Key and trun on agin;
c)Keep pressing TEST Key about 3 seconds, remove all original network information. WL-401 blue indicator light will flash quickly.
Remark: if there is other devices with allowing enter pattern in other network, this controller will join this network automatically.